MACHINE CARE
To allow the machine to operate correctly and above all to ensure a long service life, we recommend regular cleaning, both inside and out (see operation manual, chapter/ paragraph on cleaning). The stainless steel parts, painted coatings, PE500 polyethylene and PETG plates can be cleaned simply using water and soap or a neutral detergent, then rinsed thoroughly and dried with a soft cloth.
MATERIALS USED
Frame in electro-welded, painted steel;
Coating in painted steel or stainless steel.
Basins in anticorodal aluminium MG5 with anodising;
Knives and grids in stainless steel 304;
Inner cover surface and presses in polyethylene for foodstuff use PE500;
Plates in polyethylene for foodstuff use PETG;
Ring in aluminium with chemical nickel-plating.
ELECTRICAL POWER SUPPLY
All machines are provided standard for an operating voltage of 400 Volt 50 Hz 3-phase. Other voltages can be provided on request.
All machines are in conformity with EC regulations and are manufactured in Italy.
| division | min weight gr | max weight gr | basin capacity kg | press | hourly capacity pz/h |
|---|---|---|---|---|---|
| 20 | 150 | 550 | 11 | 80×120 | 1200 |
| divisions | min weight gr | max weight gr | basin capacity kg | key press | hourly capacity pz/h |
|---|---|---|---|---|---|
| 19 | 90 | 300 | 6 | 85 | 1200 |
| 37 | 30 | 130 | 5 | 57 | 2200 |
| divisions | min weight gr | max weight gr | basin capacity kg | basin diameter mm | hourly capacity pz/h |
|---|---|---|---|---|---|
| 20 | 150 | 550 | 11 | 460 | 2400 |
