MACHINE CARE
To allow the machine to operate correctly and above all to ensure a long service life, we recommend regular cleaning, both inside and out (see operation manual, chapter/ paragraph on cleaning). The stainless steel parts, painted coatings, PE500 polyethylene and PETG plates can be cleaned simply using water and soap or a neutral detergent, then rinsed thoroughly and dried with a soft cloth.
MATERIALS USED
Frame in electro-welded, painted steel;
Coating in painted steel or stainless steel.
Basins in anticorodal aluminium MG5 with anodising;
Knives and grids in stainless steel 304;
Inner cover surface and presses in polyethylene for foodstuff use PE500;
Plates in polyethylene for foodstuff use PETG;
Ring in aluminium with chemical nickel-plating.
ELECTRICAL POWER SUPPLY
All machines are provided standard for an operating voltage of 400 Volt 50 Hz 3-phase. Other voltages can be provided on request. All machines are in conformity with EC regulations and are manufactured in Italy.
| divisions | min weight gr | max weight gr | basin capacity kg | head diameter mm | hourly capacity pz/h |
|---|---|---|---|---|---|
| 11 | 180 | 500 | 5.5 | 400 | 1300 |
| 15 | 150 | 360 | 5.5 | 400 | 1800 |
| 18 | 120 | 280 | 5 | 400 | 2100 |
| 22 | 60 | 220 | 5 | 400 | 2600 |
| 30 | 40 | 135 | 4 | 400 | 3600 |
| 36 | 34 | 110 | 4 | 400 | 4300 |
| 30s | 25 | 90 | 2.7 | 340 | 3600 |
| 52 | 12 | 30 | 1.6 | 340 | 6200 |
